Incubator Controller is specially designed for Controlling and Monitoring of Incubator Operations.
Unit has provision to connect one control sensor and it can scan four / eight more channels to monitor temperature throught the chamber / incubator. Thus unit does the function of

• Data Logger
• Scanner
• Temperature Controller

Unit has Heater as well as Compressor relay outputs. Compressor switching delays are programmable.

Features

• Microcontroller based Digital Circuitry
• 4 digit x 3 row LED display.
• Dust proof membrane keypad.
• One Control Input channel input from RTD / Thermocouple
• One Control Relay Output with progammable PID action
• One Compressor Output with built in switching delay
• 4 / 8 Channels for Thermocouple / RTD Pt100 inputs for scanning and logging.
• Centronics Parallel printer interface
• 80 Column / 24 Column Printer Report selection.
• On line / Off line logging
• Individual Channel enable / disable facility.
• Individual Channel High / Low Alarm
• One relay output for alarm
• Real Time clock.
• Print interval programmable in Hours Minutes.
• Scan interval programmable in seconds
• RS-232 Output optional for PC Interface.
• 32 k RAM with internal rechargeable NiCd battery back up.
• Size 96(W) x 192(H) x 150(D) mm.